Anti theft Security Display: security and charging display brackets for all mobile phones

security and charging display brackets for all mobile phones

Technical parameter of KM-PA580:

1.Product size: 100*65*150mm

2: Single weight: 240g

3:Main material :ABS/METAL

4.Shell Color: pearl white+black
5.Internal Battery type: 3.7V rechargeable lithium battery.
6.External power adapter: DC5V 1000MA
7.Battery Standby Time: 2 weeks
8.Charge indicator: charging in red , full in green
9.Alarm sound: 105DB.
10.Alarm indication: LED red flashes.

Security function of KM-PA580:

1:Three Contacts disconnection alarm.

2:Short Circuit Alarm Function

3:Remote Start and Disarm the Alarm.

4:Password function,Change the password freely.

Operation of KM-PA580:

1.Clean the display case, then turn on switch on the bottom of Hot security cellphone /mobile phone display holder /stand with charging and alarm host, adhere the bottom of the anti-theft frame with 3M adhesive tape to the exhibit cabinet. Or use two anti-theft screws to connect the cabinet frame and tighten the exhibition (open f the screw hole cover firstly)

2.Connect the charger of Hot security cellphone /mobile phone display holder /stand with charging and alarm with the alarm host,the other end into the power socket in preparation for a fixed monthly charge.

3.Tear off the 3 adhesive tapefrom the Anti-Theft Terminal product display and paste exhibit's back fastened

4.Tear off 3M adhesive from the sensor probe, stick tight with the obverse of the product

5.Take out the Infrared remote control board , tear off the battery insulation sheet underneath. Press the ON key , the host switch on ,enter the preset alarm status

6.The installation is set up。